Equipment

MILLING EQUIPMENT:

• OKUMA Cadet – mate vertical machining center with OSP-700 CNC control, 20 x 40 travel.
• DE VLEIG Model 43J40 Jig mill with ALLEN BRADLEY CNC controls.  Machine equipped with 40" x 30" table.
• ATRUMP Model K2V vertical ram type milling machine with 3 HP variable speed head, 9" x 49" table, table power feed, 2-axis digital readout system.
• BRIDGEPORT 2J vertical ram type milling machine with 1.5 HP variable speed head, table power feed, 9" x 42" table, 12" knee, 2-axis digital readout system, chrome ways.   
• ATRUMP Model K4V vertical ram type milling machine with 4 HP variable speed head, 11" x 58" table, table power feed, power cross feed, power rapid elevation to the knee, power draw bar, coolant system, 2-axis digital readout system. 
• ATRUMP Model K4V vertical ram type milling machine with 4 HP variable speed head, 11" x 58" table, table power feed, power cross feed, power rapid elevation to the knee, power draw bar, coolant system, 2-axis digital readout system. 
• ATRUMP Model K6F vertical ram type milling machine with 6 HP electronic variable speed head, 11" x 58" table, table power feed, power cross feed, power rapid elevation to the knee, power draw bar, coolant system, 2-axis digital readout system.
• BRIDGEPORT 2J vertical ram type milling machine with 2 HP variable speed head, 9" x 42" table, chrome ways, 2-axis digital readout system
• BRIDGEPORT 2J vertical ram type milling machine with 1.5 HP variable speed head, 9" x 48" table, chrome ways.
• DEFUM Model WFB-80, 3-1/4" horizontal boring mill having 41" x 43" in-built rotary table, facing attachment, {2}
• TRAK 2-axis digital readout systems, approximately 35 tool holders for the spindle, automatic lubrication, steel sliding way covers, {2} 36" x 36" x 8" slotted and tapped angle plates, vertical milling attachment having 38" throat.

VTL:

• BULLARD 54” vertical boring mill with FANUC OT-C CNC control and swing of 62 inches
• WACHEON Model RL-2 CNC turning center complete with 3-Jaw hydraulic chuck, 12 station turret,
  tail stock, coolant system, FANUC OT CNC control
• BULLARD “Tri-motor” 42" Spiral Drive vertical turret lathe with side head, 4-jaw chuck, {2} TRAK 2-axis digital readout systems, coolant system, 30 HP main motor.                                                          
• SCHIESS 63/78 vertical turret lathe having 63" swing with side head in use and 78" with side head below the table surface. Machine arranged with a fixed 5-position turret head, side head, and swivel vertical grinding spindle. Machine has 50" under rail TRAK 2-axis DRO.         
  

LATHES:

• BETTS-BRIDGEFORD 41" x 192" centers geared head engine lathe having 3.95 to 100 RPM spindle speeds through both direct and face plate drive.  Machine includes TRAK 2-axis digital readout system, one-shot lubrication system to the carriage, 41" face plate with {4} independent face plate jaws, large capacity steady rest with rollers.
• TONG-IL Model TIPL-5 21" x 61" centers geared head engine lathe with 10" and 12" 3-Jaw universal chucks, 20" 4-Jaw independent chuck, large steady rest, quick change tool post, drill chuck, live center, rear guard, coolant system, TRAK 2-axis digital readout.
• HERCULES/AJAX {MAZAK} 18" x 80" centers geared head engine lathe with {2} 3-Jaw universal chucks, {2} 4-Jaw independent chucks, taper attachment, steady rest, coolant, TRAK 2-axis digital readout system.
• 1 - VECTRAX Model EVS 15" x 50" centers engine lathe with 3-Jaw & 4-Jaw independent chucks, ALORIS QC tool post set, face plate, steady rest, follow rest, JACOBS collet set-up, coolant system, rear guard, 2-axis DRO system

GRINDING EQUIPMENT:

• BROWN & SHARPE No. 2 universal cylindrical grinder with internal grinding attachment.
• CINCINNATI 12" x 36" centers universal cylindrical grinder with swing down internal grinding attachment, coolant system.     
• PARKER-MAJESTIC No. 2, 6" x 18" hand feed surface grinder with motorized spindle, 6" x 18" B&S
  permanent magnetic chuck.
• THOMPSON Model 4C, 12" x 48" hydraulic surface grinder with automatic longitudinal and cross feeds, power rapid elevation to the wheel head, {2} 12" x 24" electromagnetic chucks, ELECTROL chuck control, and coolant.
• BROWN & SHARPE Micromaster hydraulic 12" x 36" surface grinder with automatic down feed, over-the-wheel dresser, rapid elevation to wheel head, 12" x 36" electromagnetic chuck.
• BROWN & SHARPE Micromaster hydraulic 10" x 24"surface grinder with automatic longitudinal and cross feed, 10" x 24" electromagnetic chuck with control and coolant system.
• BROWN & SHARPE No. 5, 8" x 24" hydraulic surface grinder with automatic longitudinal and cross feeds,
  8" x 24"permanent magnetic chuck, coolant. 
• BLANCHARD No. 18, 42" vertical spindle, rotary surface grinder with flood coolant and 25 horsepower main motor.     
  

SOFTWARE USED:

• AUTOCAD 2005
• EX CAM
• RHINO 3-D CONVERSION
• SHOPTECH E2 SHOP SYSTEM 7.1